1 / 3
License Plate Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap to cover license plate screws
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 268
- Wydruki
- 4
- Wyświetlenia
- 1040
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 4) (Komentarze: 10)Remiksy (1)Kolekcje (31)Powiązane
I bought a silicone license plate holder that doesn't have 'tabs' to hold the screw, but does so from the rear. I wanted to make the screws blend in as much as possible, so created this cap to cover it. Base is captured by screw, and top cap snaps on to it.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Doesn't Matter
Supports:
Doesn't Matter
0.15
Infill:
20%
Filament:
PolyLite ASA White
Category: Automotive