Begadi Airsoft Grenade Bumper / Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two endcaps for your Begadi airsoft grenade printed out of TPU.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently bought an airsoft grenade from Begadi and even though the shells are relatively cheap to replace I wanted to protect them a little.
The caps are designed to friction fit - which they do really well. If your printer is not as precise, you can just use a bit of electrical tape or whatever tape you have to make them stay in place.
The green one is the latest (and the uploaded) version, I just also posted the pics of the (older) blue version for some color reference.
Manual tree supports are strongly recommended for the bridge, the other overhangs can be ignored as they just result in some loose tpu strings which can easily be pulled off.
Don't forget to post your makes if you give it a go :)