Handlebar Plugs Dual Color/Material
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pimp your bike with these dual color plugs
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 556
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Give some extra color to your bike with these dual color handlebar plugs. These plugs have total diameter of 32mm so they match better with lock on or really thick grips. Thanks to Single - Extruder Dual - Color technique, you don't need multi-material printer, just print its part with different color and then put them together. You can also print them with different materials. With 11, 12, 13, 14 designs you can use TPU filament for the external plug part to make it more durable to impacts.
You will need M5x25mm bolt. No nut, as the wedge-cone part has built in threads.
If the inner handlebar tube diameter is too big, you can wrap the expanding part with a piece of an inner tube (preferably 28mm width).
No supports needed.
Support me
Thank you for your interest in my designs. If you want to support me, please consider a small donation at: paypal.me/stamos3d . This gives me extra motivation to continue providing new designs.