Collapsable Soda can holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collapsible simple can holder to prevent those nasty spills on your keyboard. Max height 60mm, collapsed 35mm or 10mm
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
After too many close calls, I decided that my cans need support. Although I did not want to reduce already limited table space, so I designed this soda can holder. It uses 3 point system to stabilize upper ring which holds the can. I used simple toothpicks for the joints. When not needed the ring can be detached and lowered flush to the base. You can then either fold arms inside or outside for maximum compactness.
The idea was to also make it attachable to the bottom of the table and then retract, but I could not figure out how to make it structurally sound.
Layer height - does not matter, nor infill. Printed in PET-G.