Fluke 73 Series II Multimeter TPU Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU Case for the Fluke 73 Series II Multimeter
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since there didn't seem to be any case available for this old meter I decided to make one.
Fits very well, nice and snug with a little stretching needed to get it over the corners.
Printed out of Polymaker Yellow TPU (was the only one I could find that was that orange-y yellow that the Fluke color scheme has.
Printed in 3 walls with 20-25% fill although its mostly walls anyways.
V1 was originally designed with a much greater radius at the backside to match the contour of the meter, however when printing it out of TPU I had major curling at the edges which resulted in a poor quality print. I will include it anyways in case you would like to attempt it, however the print quality was basically perfect in V2 with the 3mm instead of 9mm radius at the bottom.