1 / 1
Quillion Lightsaber Wall Mount — zdjęcie 1

Quillion Lightsaber Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to hold a Dark Quillion Saber from Rebel Sabers with the tip hanging down.

Ocena
0 / 5
Polubienia
19
Pobrania
118
Wydruki
1
Wyświetlenia
1011
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed to hold a Dark Quillion Saber from Rebel Sabers with the tip hanging down. But should hold any saber with crossguards that fits in the below dimensions.

Cutouts are 34mm in diameter
Distance between the rests is 52mm
Crossguard rests are raised 8mm to allow for larger central body that the quillions screww into

Total width is 62mm
Total height is 80mm
Total depth is 52 mm

Recommend to print with the back face down using supports.

Tagi