1 / 14
Portable Monitor Mount Hybrid - Base and Adjustable Ball Joint — zdjęcie 1
1 / 14

Portable Monitor Mount Hybrid - Base and Adjustable Ball Joint

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This custom Monitor Mount Hybrid includes a base and adjustable ball joint for flexibility.

Ocena
5 / 5
Polubienia
42
Pobrania
209
Wydruki
1
Wyświetlenia
1823
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

This STL model is a custom design that combines elements from two excellent Thingiverse models. The base is inspired by the VESA mount from this model by u881013, and the adjustable arms are adapted from this design by hansj66. All credit goes to these talented creators for their original designs, which can be found in the provided links.

Printing Recommendations:

  • Base: It is not necessary to print the base with 100% infill, as it does not bear heavy loads. 20-30% infill should be sufficient.
  • Ball joint and Monitor base screw: These parts should be printed with 100% infill to ensure strength and durability.

Assembly Instructions:

  • The part that attaches to the monitor is designed to be secured with double-sided tape for easy installation. 
  • Before sticking it to the back of the monitor, find the center and if your idea is to put it next to your laptop, I recommend that you first check the height where the bottom of both screens continues horizontally and mark with a pencil the location where you are going to stick the disk.
  • The Ball joint is fastened to the base with M3 x15 and should be printed with supports. (Creality print project file with supports is included in the zip file) 
  • Without supports, it would need to be heated and forced into position, which could cause warping or damage. (But yeah! its possible).

Also, an apology for the quality of the photos where you can see the model being used on a 17" Arzopa monitor.

Happy printing!

Tagi