PBR Bow top bar Silly Shell mount/holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PBR Bow top-bar mounted Silly Shell holders for the silly shell version
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 425
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I haven't printed this yet (but will in a couple days), so I cannot confirm it works. I ordered my hardware kit and am printing all of my parts right now, I will add an addendum when I build the PBR bow to confirm or deny functionality.
Requires 2 extra 7mm M3 Heat-set inserts (the ones that Flycore uses) Mcmaster part #94180A333 and 2 M3x8 bolts, because that's what I had lying around, and I like to use heat-set inserts for things.
Print 2 of the 2-shell holders, and they should mate with the grooves and heat-set insert holes I added to the bar. You could theoretically use two of these bars for 8 shells held, but it would get in the way of the grips.
I designed this for a right-handed user (myself), but you could just flip the bar in your slicer and use it for a lefty (the holders you could just physically turn around)
I have also added the .f3d file for anyone who wants to keep iterating, I did this design in like 30 minutes, and wanted it to be removable, so I'm sure it could be done better.