1 / 1
Sturdy desiccant cup for filament dry box with rollers, works with .6 nozzles, less retracts and z-hops V2;
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to avoid all the nasty retracts, now with grid top
- Ocena
- 4,9 / 5
- Polubienia
- 36
- Pobrania
- 358
- Wydruki
- 11
- Wyświetlenia
- 1219
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 11) (Komentarze: 16)Remiksy (1)Kolekcje (67)Powiązane
Model resized to exactely match the original. Thanks for pointing this out (Jeff Noxon)
For best results, set the z-hop to 0, set seam position to nearest and use Arachne wall generator.
Print time with my Sovol SV08 under 15min
Also works with .6 nozzels! (use arachne!)
Had a lot of fun designing this in Fusion 360 :)
