E3D V6 Heat-Sink Fan Shroud for High Temperature Printing.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The heat-sink fan on the E3D V6 draws in air from all directions.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 1027
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The heat-sink fan on the E3D V6 draws in air from all directions. This can lead to localised cooling of the print and Heated Bed. The is especially noticeable when printing at high temperatures. This fan shroud ensures air is drawn from areas away from the Bed and HotEnd thus helping to ensure higher quality and warp-free prints.
This is designed for the 30x30x10 Heat-Sink Fan and works with the original fixings.
Print with your favourite thermoplastic | http://e3d-online.com/All-Filament
EDIT | Fixed STL
Also available for the E3D Titan Aero | https://www.thingiverse.com/thing:2571126
Love 3D printing? Love T-Shirts?
Then you need to check out steps-per-mm.xyz!
It is loaded with a huge range of wearable Parts & Components.
Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)
eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk
Print instructions
Category: 3D Printer Accessories Print Settings
Printer: BigBox
Rafts: No
Supports: Yes
Resolution: 0.25mm
Infill: 20%
Notes:
Print with a 0.4mm Nozzle in your favourite high-Tg thermoplastic. I recommend a small section of support to help with the print overhang.