Flexible Wire Brush Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In my maintenance toolbox, there is a small wire brush. Slightly bigger than a toothbrush, but with sharp steel bristles
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 106
- Wydruki
- 6
- Wyświetlenia
- 480
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In my maintenance toolbox, there is a small wire brush. Slightly bigger than a toothbrush, but with sharp steel (or brass) bristles. Great tool to scrub burnt plastics off a 3D-printer nozzle.
Searching things in such a toolbox can be literally painful. Sooner or later the bristles will find your fingers. Keep the bristles clean, and your hands safe. Put the brush into a protective cover!
As is, the inner size is 41mm long, 13mm wide and 21mm high. Easily scaled in cura, or if you know how to change parameters in FreeCAD: It is parametric!
The entry is slightly smaller than the cavity to make sure it does not fall off. Adjust as needed.
Printed with TPU standing upright, 0.2mm Layer height, 25% infill.
Category: Organization