Ladder_Feet_40x23mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These plastic feet are replacement parts for an aluminum household ladder.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 76
- Wydruki
- 3
- Wyświetlenia
- 311
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These plastic feet are replacement parts for an aluminum household ladder. The aluminum legs are rather thin, and work their way through the original feet, after some time. The result is, that we have the ladder standing on the sharp edge of the aluminum leg on the carpet, while the feet crumble and fail to protect the floor.
My ladder has two type of legs
- 40.7mm x 23.2mm and
35.4mm x 23.2mm The exact shape and dimensions of the legs is a parametric sketch in freecad, so you can easily adapt them for different legs.
Printed with PETG and 3 perimeter lines and 50% infill to make them strong. Do not use PLA, it will become brittle after a few weeks.
I am using a daily preview build of FReeCAD 0.19 -- this is where the thickness tool works correctly in the part design workbench.
Category: Replacement Parts