1 / 2
Teleskopic ladder repair / Teleskopleiter Reparatur
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nachdem sich die Original-Puffer aufgelöst haben, habe ich diese für meine Teleskopleiter konstruiert.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Material:
TPU A85 semi-soft von Extrudr
Dieses Filament ist auch druckbar mit Bowden-Extruder.
This filament is also printable with Bowden extruder
https://www.3djake.at/extrudr/tpu-semi-soft-schwarz?sai=3867
Druckeinstellungen:
Layerhöhe 0,2 mm / Infill 20 % / Support No
Zusätzliches Material / additional material:
Schrauben / screws M4 x 35 mm
Muttern / nuts / DIN934 M4
Gutes Gelingen und über ein Like würde ich mich freuen.
Good luck and I would be happy about a like.