BigBox Adjustable Brushed Wiper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Adjustable Brushed Wiper for use with the BigBox, perfect for printing with E3Ds Hardened Steel Nozzles.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
An Adjustable Brushed Wiper for use with the BigBox, perfect for printing with E3Ds Hardened Steel Nozzles. Ideal when printing with abrasive filaments such a Carbon Fibre.
Compatible with all versions of the BigBox.
You will need
2 x Small Brass Brushes with the handles cut off.
2 x M3 6mm Grub Screws to hold the brushes.
3 x M3 8mm Socket Cap Screws to clamp the rubber strips.
Do not use with non-hardened nozzles or socks!
Love 3D printing? Love T-Shirts?
Then you need to check out steps-per-mm.xyz!
It is loaded with a huge range of wearable Parts & Components.
Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)
eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk
Print instructions
Category: 3D Printer Parts Print Settings
Printer: BigBox Pro / Dual
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.25mm
Infill: 15%
Notes:
Requires some support in the channel for the brushes. STLs orientated and faces chamfered for best printings.