SKR V1.3 Magnetic Case for K8200 (20*20 extrusion)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case with an 80mm fan mount for the Bigtreetech SKR V1.3. You willl need to get two M5x12mm screws to attach…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case with an 80mm fan mount for the Bigtreetech SKR V1.3. You willl need to get two M5x12mm screws to attach it to the K8200, four M3x10mm with matching nuts for the mainboard and four M4x8mm to screw the fan to the cover. You will also need 8 times 10x2 round neodynium magnets to attach the fan cover to the case. I've also added the STEP files , so feel free to Remix it :)
Print Settings
Printer Brand:
Velleman
Printer:
K8200
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament:
Fillamentum PLA Noble Blue
Category: 3D Printer Parts