Gear/Cog Drinks Coaster V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drinks coaster that contains gears and an outer wheel that can be spun. If you place 2 together spinning one will…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A drinks coaster that contains gears and an outer wheel that can be spun. If you place 2 together spinning one will spin the other.
This is version 2. Version 1 has also been uploaded to here.
Print Settings
Printer:
Aquila
Rafts:
No
No
Resolution:
Your choice I used 0.2mm
18%
Filament: SUNLU Silk PLA+ Your choice. I used Black and Red
Notes:
Print 6 of the gears.
To assemble, place the inner wheel and then the gears on the pegs of the base and then add the outer wheel. The top will need to be correctly oriented to fit on the pegs. Use a small amount of glue at each corner to attach the top.
Category: 3D Printing