BTT Eddy Probe Mount for Archetype Blackbird Fan Cover For use with Rapido 2 UHF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eddy up!
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 1208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount your BTT EDDY Probe on your Blackbird toolhead with zero changes to anything other than the fan cover! Make sure you have a UHF version. The short versions of the toolhead for HF models WILL NOT FIT! It must be something like the Rapido 2 UHF.
Yeah visibility kinda sucks but it's the only place for the probe unless you take it further away from the nozzle rearward. Where it is here is about the same as a standard Stealthburner mount, but just on the other side of the hotend, however in this position it can scan the entire bed right up to all 4 edges!
Eddy Coil Probe used here & working….
Eddy Probe LED is visible through the logo.
You'll need x4 20mm M2.5 capped bolts to secure the unit.
You will also need to print one of these & use 2x Voron BOM M3 heat inserts.
Probe is set for 2.5mm height.
Offset is X0, Y-23.4