Filtration system for 3D printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filtration system for the Enclosure for A1mini and more?
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a filtration system for the Enclosure for A1mini (https://www.printables.com/model/595731-bambu-lab-a1-mini-enclosure). I was inspired by a bento box, which has the same style of stacking filtration layers. This system uses carbon cartridges designed for SLA printers and a HEPA filter for a robotic vacuum cleaner. It can be used in several ways:
1) reducing the temperature inside the enclosure and filtering air when printing PLA/PETG
2) filtering the air after printing ABS/ASA.
I believe this system can also be used with other enclosures where 80x80 fans can be installed.
You will need 4x M3 threaded inserts, which you will melt into the holes as shown in the photo below.
The remaining holes in the parts need to be fitted with D5x6 magnets, which must be glued in parallel with the surface.
Assembly Instructions:
look at gif in pictures above.
Carbon cartridges:
HEPA:
Magnets: