1 / 6
Cute Articulated Dragon (Single Extruder – Dual Color) — zdjęcie 1
1 / 6

Cute Articulated Dragon (Single Extruder – Dual Color)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This articulated dragon is my design. It's made especially for the Single Extruder – Dual Color contest.

Ocena
4,9 / 5
Polubienia
1067
Pobrania
2455
Wydruki
17
Wyświetlenia
20 889
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

About 

This articulated dragon is my design. It's made especially for the Single Extruder – Dual Color contest. In my opinion, it's cute and well flexible.

You can make it as long as you might even want!

The parts fit together well. The tight tolerance is 0.15 mm and the loose tolerance is 0.3 mm.

 

Print instructions

I highly recommend using premade .3mf files!

The reason is that some parts need 100% infill at some places and supports are optimized.

If you still want or need to print .stl files, print the sticks going out of the BOT parts with 100% infill. If you don't, connections between parts will be brittle and might break!

Don't forget to set up your filament and printer in the settings.

 

If you have any questions, you can contact me here:

https://www.instagram.com/3dtiskfranc/

 

Happy printing!

Tagi