Frigidaire Replacement Stove Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement stove knob for a Frigidaire drop-in range. This is probably compatible with more than just Frigidaire.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 827
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Multiple knobs from my Frigidaire drop-in range were broken in various degrees. Replacements are expensive, so I modeled this myself in Fusion 360 with measurements taken from a mostly working knob.
I printed mine in ASA/ABS for heat resistance at 90% infill as previous versions broke during use.
There is a color change at the end allowing you to add a little color for the line marker in the bgcode file.
Since making these while learning Fusion 360… My stove died and needed replacement! Since I have been helped by so many with models from here, I thought I would add this in the hopes will may help someone else.
I have included the Fusion 360 file as well.
NOTE: Please be kind as I am new to 3D print and even newer to Fusion 360.