Telescope Solar Filter & Case.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An attachment for your Telescope designed to hold 100mm (4") square sheets of solar filter.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 1050
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
An attachment for your Telescope designed to hold 100mm (4") square sheets of solar filter. It will work with other filter sheets too of course.
Read about the filter on instructables | http://www.instructables.com/id/Astrophotography-With-the-Raspberry-Pi-Zero
Optional case to protect your filter when not in use.
It will fit on telescopes with a dew shield up to 100mm (4") in diameter.
STLs chamfered and orientated for best printings.
Print with your favourite thermoplastic | http://e3d-online.com/All-Filament
Required Components
1 x 100mm (4") Square Sheet of Filter.
8 x M3 16mm Socket Cap Screws.
8 x M3 Square Nuts.
4 x M4 16mm Socket Caps Screws.
4 x M4 Square Nuts.
Love 3D printing? Love T-Shirts?
Then you need to check out steps-per-mm.xyz!
It is loaded with a huge range of wearable Parts & Components.
Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)
eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk
Print instructions
Category: Physics & Astronomy Print Settings
Printer: E3D's BigBox
Rafts: No
Supports: No
Resolution: 0.25mm
Infill: 15%