1 / 4
Better Stronger Screws for Flexible & sturdy phone arm (100% Printed) — zdjęcie 1
1 / 4

Better Stronger Screws for Flexible & sturdy phone arm (100% Printed)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stronger, and easier to print and handle screws for the Flexible & sturdy phone arm (100% Printed)

Ocena
4,889 / 5
Polubienia
104
Pobrania
880
Wydruki
11
Wyświetlenia
1885
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The original screws were printed vertically. After using the original screws for a few months, it started to split at the layer lines, so I decided to make these screws, that you can print horizontally on the bed, which also gave it an advantage of usability, as it is easier to screw, cos the flat surface gives better grip. Also need much less infill.

Print Horizontally

PETG is preferred, but PLA works too.

  • 20% gyroid infill
  • 3 walls
  • inner/outer wall order
  • No support
  • No rafts

 

Filament used in the pictures:

  • CC3D PETG Lime Green

Tagi