AppleTV 4K 1st/2nd Gen 2021 Mount (Vented)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed mount for AppleTV 4K (1st Gen and 2021 2nd Gen only)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Minor remix of @Founders' nice model (which he remixed from @polmdm's excellent original).
Founders intended vertical mounting, but I needed a horizontal mount for under-shelf mounting in an entertainment console. This meant restoring some of the screw holes he had removed from the original (just two small 4mm holes… these are not very heavy). I also fixed the “heat vents” he added (which did not actually allow heat to escape if flush mounted… I guess they would work if it was suspended in midair?) to allow ventilation from rising heat.
Print instructions:
Rafts: No
Supports: Yes, supports required (for the retaining lip), Organic recommended
Layer Height: 0.2mm .4mm Nozzle
, or 0.3mm .6mm Nozzle
Infill: 15-20%
3 perimeters
3 tops
3 bottoms
Filament: PETG recommended, PLA should work fine (but PLA+ would probably be better). ABS or ASA probably fine but not needed.