QUICK-CLIP : Extra beefed up, Heavy-Duty Reinforced Buckles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the sake of it. Beefed up the walls of the buckle.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This might be overkill but, I made the walls of the buckle thicker by turning them into a bevel from the bottom of the buckle to the top of the wall. I have no Idea if any of those buckles ever broke this way, but I figured I'd make the modification anyway.
I've only done it for the QUICK-CLIP - Buckle for Parallel Straps version.
There are two ways to print it :
In one piece or in two parts.
I've made a two parts version so that the base can be printed flat and the top can be printed on it's side, so that both parts can be printed in the optimal layer orientation.
Clean things up, glue everything together and have fun.