1 / 3
Endoscope mount for SF 3x5015 Neptune 4 fan mod shorund
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small parametric bracket for holding an endoscope towards the hotend.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (23)Powiązane
Small parametric bracket for holding an endoscope camera
The base model was made for a cheap aliexpress one with a diameter of 7.2mm,
but you can change that slightly in the model with a maxium of 8mm
same goes for the offset from the fan shroud
In the same way as the shround it should be printed out of:
- PETG
- ABS
- ASA
- Any low creep, heat resistant materials