Parametric Playing Card Case (for Fusion 360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple snap-together card case, featuring solid sides for printability, and a parametric source file from Fusion 360.
- Ocena
- 4,667 / 5
- Polubienia
- 23
- Pobrania
- 113
- Wydruki
- 3
- Wyświetlenia
- 535
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
Included are some sample files - Cards Against Humanity - Australian Edition Question Cards, and one for a regular Queens Slipper card pack.
Prints should work with most rigid materials, might work with TPU but would be best with high-quality PLA or PETG.
Redesigned from the ground up, using Elias Ramboz' design as inspiration for the overall style and clip mechanics, backed by parametric attributes in Fusion 360 to easily resize for individual card decks.
This variant does consume more filament, but uses solid sides (to aid printability and remove the need for supports on FDM machines), thicker top/bottom bezels, and less aggressive clips to reduce strain on the walls.
This variation may be more suitable for lower-quality or older machines that have trouble creating reliable supports, or for printing with more finnicky materials, such as TPU, ABS or PETG instead of PLA.
Customising Parameters
(reference below was as used for the Cards Against Humanity Australian Question Cards.
The regular playing cards file has different deck dimensions and thinner 4mm walls.)
To quickly adapt the model for a new card deck:
- Measure the card width as deck_width
- Measure the card height as deck_height
- Measure the overall deck thickness as deck_thickness
- Tweak other parameters as necessary for desired results
- Export each body (Side A and Side B), and print. Note that two Side As would not fit together.
| deck_width | Width of card face |
| deck_height | Height of card face |
| deck_thickness | Thickness of entire deck |
| tolerance | Extra spacing around deck in 3 dimensions (and between clips) |
| wall_thickness | Thickness of the top/bottom and side walls |
| window_radius | Corner radius of the top/bottom windows |
| window_width | Width of the bezel surrounding the top/bottom window |
| wall_radius_inner | Sets the inside-radius of the card space |
| wall_radius_outer | Sets the outside-radius of the corners of the box |
| big_clip_width | Sets the size of the base of the clip on the width-side of Side A |
| big_clip_height | Sets the size of the base of the clip on the height-side of Side A |
| overall_width | Calculated value for overall box width |
| overall_height | Calculated value for overall box height |
| small_clip_width | Sets the size of the top of the clip on the width-side of Side A |
| small_clip_height | Sets the size of the top of the clip on the height-side of Side A |
Note that in the version uploaded, side clip widths are a function of the window width. You might want to adjust how that's calculated if you're tinkering with the window bezels.