1 / 3
More robust 1/4in camera mount for Sneaks' articulating mount system — zdjęcie 1
1 / 3

More robust 1/4in camera mount for Sneaks' articulating mount system

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed the connector so that it can be tightened to a standard 1/4in camera screw with no fear of cracking.

Ocena
0 / 5
Polubienia
8
Pobrania
50
Wydruki
0
Wyświetlenia
246
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

After printing the mounting system, I managed to crack the connector that held the webcam for me. So, I decided to make a more robust way of connecting standard 1/4in camera screws to this mounting system.

Includes multiple variations, 100% and 75% scale, as well as with or without inbuilt supports.

The standard “100% scale" just has the holes filled, so you can put in as long of a screw as needed and tighten without worry.

The “75% scale” is made so that it fits with standard M5 hex scews. Recommended to use metal screws, as printed ones WILL deform/break over time.

Use at least 4 walls and 30+ infil. Best to use PETG.