CB radio mount under the passenger seat for Jeep Wrangler JL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a base that you can clip on the front row seat adjustment lever (the one for moving forward-backward).
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 127
- Wydruki
- 1
- Wyświetlenia
- 1111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I have created this model to fit a base module of my Midland M-5 CB radio under the passenger seat. M-5 has all the controls in the mic piece, so I was able to hide the rest.
M-5 is fairly small (barely ~12 cm width, less than 14 cm with the install frame), hence I was able to fit it between the bars of the lever.
Using a 1 m long Ethernet cable I was able to route the mic back and then forward again between the seat “rail” and the central console, so it won't get into the way when adjusting the seat.
