Spinning Top !
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is somewhat difficult to print. I was successful only from the third time. Fortunately, these attempts take…
- Ocena
- 4,556 / 5
- Polubienia
- 103
- Pobrania
- 794
- Wydruki
- 11
- Wyświetlenia
- 4168
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This model is somewhat difficult to print. I was successful only from the third time. Fortunately, these attempts take a little filament. And if you, like me, do not have significant experience, it is better to order a print by professionals.
But as a result, you may have a favorite desktop toy, a funny mascot. For those who will try to print themselves, I will share my settings: the main thing is the alignment of the seam along the Z axis:
(Cura) Settings - Walls - Z Seam Aligment
(PrusaSlicer) Print settings - Layers and perimeters - Advanced - Seam position
it must be selected - Random. This is necessary for a better balance.
100% concentric filling.
Support: I'll just say that although Cura puts the support more carefully. But my successful option still turned out to be from PrusaSlicer.
And in the end, you will still have a thorough post-processing with sanding paper (or maybe your imagination will tell you something else).
All the best to you! And have a good print!
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
100%
Filament:
SUNLU PLA
Notes:
Category: Toys & Games