Guide of paint tape in corners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Это дизайн Андрея Шайтера. Все подробности на видео https://youtu.be/Ub1nqJN16CQ (ставим лайки!) Я воспроизвел его для…
- Ocena
- 0 / 5
- Polubienia
- 66
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Это дизайн Андрея Шайтера.
Все подробности на видео https://youtu.be/Ub1nqJN16CQ (ставим лайки!)
Я воспроизвел его для тех, кто хотел бы распечатать эту модель, но не знаком с 3D моделированием. Для тех, кто знает Fusion 360, есть исходные файлы - можно получить любую глубину толкателя и ширину крышки, достаточно только изменить значения переменной (MODIFY→ Change Parameters)
This is a device for the smooth sticker of a protective paint tape along the inner corner. With this device, you can paste the paint tape exactly in the corner or with an even offset from the corner (0.5, 1, 1.5, 2 mm), the pusher is designed for a tape width of 20-30-40-50 mm. But if you have a Fusion360, you can adjust the pusher to any width of the tape. To do this, you only need to change the table variable in the source file (MODIFY→ Change Parameters). The same applies to the original cover file. I.e., the indent from the corner can be changed using a variable.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
38
Filament: PolyMaker PETG
Notes:
Category: Hand Tools