Scale Battery Box for 1/10 RC-Crawler - Different Designs and Manufacturer Logos

General Description:

For my many scale crawlers I was looking for a solution to change the battery quickly and easily.

I've uploaded several battery boxes here. Check out the pictures.

Use them for example for RC4WD Chevy K10, Mojave II, 4Runner or INJORA Jeep JK

Design 1 (Magnet Lock):

• inside 105 x 45 x 32 mm / most ShortyLipoPacks fit
• Requires 20x5x2mm neodymium magnets (8x)
• Glue the magnets into the holes provided using epoxy resin
• If your printer is not very precise, the holes in the lid need to be re-drilled (3mm)
• Use the drilling template if you want to attach the box to the truck with screws

Design 2 (Magnet Lock):

• 105x45x30mm inside. Most short lipos fit. Lid can be closed with magnets or screws.
• Screws: Drill the marked holes through the lid and use 2.5mm screws.
• Magnet: Requires 20x5x2mm neodymium magnets (4x). Print the magnet holder files and glue the parts with the magnets to the box and lid. 

Design 3 (Hinge with Magnet Lock):

• External dimensions are 120 x 50 mm. Most short lipo packs fit in.
• Requires 4 pieces of neodymium magnets measuring 5x4x2 mm.
• Magnets must be glued into the holes.
• M2 screws are required for the hinge.
• If you want to screw the box firmly onto the loading area, you can use the drilling template to drill through the loading area (use 2,5mm self tapping screws).