J1772 EV Charger Wall Mount Holder Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-profile EV Charger Plug & Cable Holder with higher wall, smooth rounded corners, & command strip mounting surface
- Ocena
- 4 / 5
- Polubienia
- 48
- Pobrania
- 475
- Wydruki
- 1
- Wyświetlenia
- 2360
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
This EV Charger wall mount for J1772 plugs takes up a lot less space, protruding less than
3" (76 mm) from the wall! The 90° plug at a 45° downward angle is accessible and easy to plug in.
Features:
No holes in your wall! The wall mount is designed to be mounted with Command Strips (I used a few strips of the 20 Lb variant). Dual-Lock, VHB, or any adhesive > 2.0mm thick should also work! I'm renting, so will inevitably remove this from my garage, hence the Command Strips.
Recessed Pocketing for Mounting Strips! So it doesn't have a wide, highly visible gap between the wall & the charger wall mount.
Taller cable keeper wall! To make it easier to coil your cable around and keep it there.
Design: Looks really sleek & aesthetic. Honestly, Ken did all the hard work with the functional design. I just added some rounded corners. It's a **little** bit more difficult to print, but hey… it looks really cool. I printed with PETG-CF with fuzzy skin to get that awesome matte textured appearance.
Ideal Print orientation: Utilizes the strength of layer lines to create an inherently strong print that requires almost no supports! I did however add a few chocks/wedges/support blocks to the rounded corners (purely for aesthetics), which I snipped these off & lightly sanded after printing. Pictures show the results! It came out pretty cleanly in my opinion.
Will Adhesive Really Work? Yes! As long as you prep your surfaces properly & are patient for the first few days! It's worked for me for 1+ months so far (since Sept 2024 if I don't update this description), & my garage has gotten up to 100°F (38°C) this month. Follow these simple best practices for best results!
- Be sure to clean your surfaces using >90% IPA (rubbing alcohol) before applying any adhesives! This can more than double the adhesive bond strength! (See Bonding properties of pressure-sensitive adhesives on white goods for some examples).
- As tempting as it may be, don't plug in your charger and hang your cord right away. Almost all PSA's (Pressure Sensitive Adhesives, e.g. tape, double stick tape, etc.) don't reach 100% bonding strength for 72h! (See The relationship between adhesive curing time and bonding strength).
Obviously this is a remix, and a huge thanks goes to @Ken for allowing Remixes of his model!