Fringe Twister
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple fringe twister for weavers
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 494
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
4 clip Fringe Twister that my weaving partner requested. The large block is designed for either suction cups to secure it in place on a table, or with the centre hole can be clamped in place to secure it using something like a simple clamp brace
You'll need to print 4 of the spines. I was able to print the spines without supports, but it gives a better finish to print the large block with (organic/tree) supports.
Assembly is straight-forward: clip each of the spines into the small block with a small amount of force. Then align all 4 and push them through the holes in the large block. Then push on each crocodile clip. The standard clips should push on and re-crimp but a bit of glue may be useful to hold them in place, depending on the clip.
How to use a fringe twister: