Door Knob Converter (Lock Add-on)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This piece is an addition to the Knob Converter located here:https://www.thingiverse.com/thing:3139910I made this…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This piece is an addition to the Knob Converter located here: https://www.thingiverse.com/thing:3139910
I made this addition as part of an assignment at Somerset Community College to address an adaptive modification to an everyday task - specifically arthritis.
Changes: I used 6-32 1.25" screws to secure the Knob rings. (including original part) 2.5mm diameter screws to secure the ring to the locking mechanism.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
No
Supports:
No
0.2
Infill:
20%
Notes:
Can lower the infill, this part is not under as much stress as the original piece. Be careful to make it match the screws.
Category: 3D Printing