'Free Guy' (2021) Secret Disk #56
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those that have seen the movie, this is the video disk that gives them an important clue.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this back when I first watched the movie and had planned on selling it on Etsy. It's mostly designed to be resin printed, of course I've since developed a bad reaction to the resin and can no longer work with it; So, I've decided to share the files.
The flat pieces can be difficult to print, and they are probably best FDM printed then cast to resin if you're picky enough, or even CNC'd if you have the machinery.
This was designed around the parts I had plenty of at the time. You'll need:
7x - m3x4mm flat head hex bolt
4x - 10x3mm magnet
2x - m3x2mm flat head hex bolt
1x - 12v Yellow LED strip
1x - 12v White LED panel ( https://a.co/d/9AGoK2J )
1x - 23A battery (12V)
1x - Small push button switch ( https://a.co/d/7Hoab0T )
When you print the ‘display’ file shown in the images, you can use it as a guide to cut a slightly larger piece of standard transparency film for binders that will hold it in place. You will need to run a small section of wiring through the channels to connect it all up, the routing of which I'll leave to you.