1 / 4
BetaFPV Pavo 20 Pro canopy for Walksnail Moonlight — zdjęcie 1
1 / 4

BetaFPV Pavo 20 Pro canopy for Walksnail Moonlight

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Canopy that allows to have dual antennas and a small GPS

Ocena
0 / 5
Polubienia
31
Pobrania
283
Wydruki
1
Wyświetlenia
2492
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

That's my variant of the original canopy. I've added holder for 2 antennas and a GPS.

Printed in TPU, will see how it holds.

GPS used: Foxeer M10Q-120 ← this is my go to for small quads. Amazing performance.

https://www.foxeer.com/foxeer-m10q-120-gps-5883-compass-g-517 

(ping me if you need a size mod for a different GPS)

 

I've added an STL for WS-M181 GPS (untested).

 

Antennas used: Osprey 5.8Ghz 40mm Ipex/UFL FPV Antenna – LHCP ( but any similar antenna should work well. If you can get even 30mm, it might work better, but the initial fit will be harder.

https://www.flyfish-rc.com/products/osprey-5-8ghz-40mm-ipex-ufl-lhcp-stubby-antenna

 

Buzzer used: Any buzzer can work, but mine is IFlight YR50B_S 

 

v5 - updated to add place where I mount buzzer + added another hole to allow higher camera angle.

It flies great, I can get easily 1 km of range out of the short antennas, but the battery becomes an issue. No problems with the canopy at all. A bit hard to print and fit the antennas, but it's sturdier this way.

 

 

Tagi