LayersFactory
Zgłoś model
1 / 4
Growmax Enclosure — zdjęcie 1
1 / 4

Growmax Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

Official Enclosure for the Growmax Garden Automation Board by OpenSensor.io

This is the official enclosure for the Growmax garden automation board sold by OpenSensor.io. I print and include this model with the kits I sell, but I'm also making the STL files available for free for non-commercial use so that any Growmax board owner can print their own enclosure.

This model was created after I started selling the boards, so this release provides an easy way for customers to obtain an enclosure if they still need one.

Recommended Print Settings:

  • Best printed in PETG (though PLA should work fine as well).
  • Use snug supports everywhere for both the base and lid.
  • For the base: knock out the connector openings.
  • For the lid: use a thin, flat-head screwdriver to pop off the branding detail.

Tagi

enclosuregrowautomatongrowtentopensensoriogrowmax