Modular Badge Holders (RSA + Card)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular 3 piece Badge Holder. Mix and Match to create your one of a kind badge holder.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 250
- Wydruki
- 2
- Wyświetlenia
- 1901
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modular 3 piece Badge Holder. Mix and Match to create your one of a kind badge holder.
All designs contain a spot for a badge and 1 additional card.
Modules:
- Simple
- Geometric
- Geometric (no hanger)
- Geometric 2 (more complex)
- Spiral
- Slot
- RSA Simple * updated 10/16/2024
- RSA Triangle * NEW 10/15/2024
- RSA Circle * NEW 10/16/2024
*RSA modules are not compatible with non-RSA modules
Assembly:
Line up the tabs on each of the 3 components and snap them together. Be sure to position the raised side of the base on the badge side, and the flat side of the base on the card slot side.
I suggest gluing your final design together to make sure you don't loose any important cards.
RSA Module requires the RSA cover to be glued to the card holder. this is intended to make printing simpler and ensure the parts are all printed in the same orientation to snap together, these tolerances are tight.