1 / 7
Anycubic Chiron Camera Mount/Cable tie off point (for direct drive converted Chirons)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Raspberry Pi Camera V2 Mount for the Anycubic Chiron. Its for printers that have been converted to direct…
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Raspberry Pi Camera V2 Mount for the Anycubic Chiron. Its for printers that have been converted to direct drive, freeing up the space from the extruder such that it can support cables and a camera.
Assembly is fairly self explanatory
No supports needed
Cloned From Thingyverse
Parts you need to acquire:
4 - M3 X D4.6 X L4.5 Knurled Brass Threaded Inserts, (Here's an example link)
You can get away with just using nuts though
- Some M3 Bolts. (Just buy a 10 dollar kit with a variety of sizes and you'll be good)
Category: 3D Printer Accessories