1 / 1
Magnetic board game bits trays for 6mm x 3mm magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
modified @Jameson42_287359's model to fit 6mm x 3mm magnets
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Modified the magnet holes to fit 6mm x 3mm magnets
Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in
Had to thicken the walls a bit to fit the bigger magnets, as well as made the walls taller.
Also changed the angles a bit to better fit the thicker walls
