1 / 6
MAK Shelly 1 Mini Housing for Home Assistant
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for Shelly 1 Mini Gen3 with Home Assistant logo and manual switch.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 882
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (37)Powiązane
Designed to be easily printed on any 3D printer, not only on multi-material ones. Home Assistant logo is just a cool add-on – glue it in place to complete assembly.
For assembly you will also need four M3 threaded brass inserts and screws.
For emergency switching this case is prepared to receive manual switch.
I used this housing to replace my Nest controller of a gas boiler, so mounting holes will fit perfectly as a Nest replacement.