RC Car winter tire + wheel 235/55 R19, Michelin Alpin 6 tread profile at 1/12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a scale tire for medium compact cars. Diameter ca 60 mm width 20 mm; 12mm hex hub
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 323
- Wydruki
- 2
- Wyświetlenia
- 1139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my third tire design and this time it's a new tread profile, Michelin's Alpin 6 winter tire.
The tire prints without supports and without infill when put on the side. With TPU it should take ca 2 hours per tire (0.3) .
The rim is the SOFIA rim of the new Peugeot 3008 (2024) and prints with organic supports to ease supports removal ca 1 hour per wheel (PLA 0.3)
In case you need all 4 tires, you should mirror the model in the slicer and print 2 of each, beacause this is a directional tire (The STL I'm providing is a left tire)
Dimensions:
tire = 61.8 mm x 20 mm (1/12 scale for a 235/55 R19 tire)
Rim = 40 mm x 20 mm