Pixels Dice Vault with Charging Base

Dice Vault for Pixels Dice (support my designs with this referral link: gamewithpixels.com) that supports charging and sleep, plus space for other dice. Theoretically it supports all dice types with individual chargers, but I only have D20's to verify at the moment. I will add additional Base versions that support up to 6 individual device as time permits.

When installing the magnets to keep the lid closed, make sure to align the polarity properly in the correct orientation. I flip one of the 3 to reversed polarity so the lid will only close one way, aligning the sleep magnets properly.

The sleep magnets save battery when moving the vault by putting the dice to sleep. After installing the sleep magnets in the lid, I cut and glued some thin foam sheets to line the inside. The lining is optional, but definitely reduces the noise when traveling or rolling dice in the lid. To remove the dice tray from the stock Pixels individual charger (and access screws for removal), insert something long and thin through the hole in the bottom of the charger to push the tray up and out.

Supplies needed:

• Parts from stock Pixels individual chargers (easily disassembled)
• 6x Magnets for lid and base, currently sized for 3mm x 8mm disc-type magnets
• 2x Magnets for lid to put Pixels to sleep when closed, currently sized for 3mm x 6mm disc-type magnets
• Lining for lid and base (optional, shown with 2mm craft foam)
• 4x M2 x 4mm socket heads (optional, can use the stock screws)

This is my first design, I am certainly open to ideas for improvement. Feel free to buy me a coffee/leave a tip here: paypal.me/TJehosephat.

EDIT: Updated files with notch on two sides to make opening/alignment easier