Paul's Remixed Packout Foot for 1/4" Hardware
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed this model for use with 1/4" hardware and changed the holes positions and rotation.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Description
I remixed this model for use with 1/4" nuts and bolts rather than m5. I moved the holes a bit more centered in the print for stronger walls. I rotated the 3rd nut hole so it can be printed without supports.
I wanted to mount my Makita combo drill case vertically from it's side using 2 feet rather than on it's bottom using 4 feet, so that I could fit more on top of my Packout (Packout backpack, Dell laptop case (also mounted with these feet) and the drill case). For this I made sure to increase the walls from 2 to 4 layers and printed on an angle to avoid the side tabs from shearing off/delaminating while pulling the Packout over uneven surfaces as the case will wobble a bit and is quite heavy.
I recommend printing on an angle to increase the strength and reduce shearing force/delamination, no supports needed.
Each foot requires 3 x ¼" Nuts and 3 x ¼" bolts at ¾ or 1" long, depending on the thickness of what you are mounting them to.
Print Settings for MAXIMUM Durability
- Material: ABS, ASA or PETG
- Nozzle Size: 0.4mm
- Layer Height: 0.2mm
- Vertical Walls: 4
- Top/Bottom Layers: 3
- Infill: 50% (or 100% if your container is very heavy).
- Supports/Brims: Nope