Betty Boop Card
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 324
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
Anyone that loves Betty Boop will love having this made for them!
Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Bambu and Anycubic files included.
The Model is 143.95x200mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Skin Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.12mm) swap to Red
At layer #19 (1.68mm) swap to Skin
At layer #24 (2.08mm) swap to White for the rest.