Penny Sleeve Trading Card Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This trading card box will perfectly protect your cards while they're in penny sleeves.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 182
- Wydruki
- 1
- Wyświetlenia
- 722
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This trading card box was designed to fit trading cards that are in penny sleeves (card sleeves) securely. The model has four different card sections in the base and the top has a snap fit to make sure it doesn't fall off.
The internal width of the card enclosure is 70mm and the internal height is 96mm and each of the four sections probably can hold around 140 cards (560 total) without the sleeves on. I haven't counted how many can fit with the penny sleeves on, but assuming it would be around half.
Printing: This model is relatively straight forward to print and should work on most medium size printers. Print both flat sections directly on the sheet with no supports or brim. I printed mine with 15% Gyroid infill and it feels very sturdy. The side walls are 2mm and the tops/bottoms are 4mm, so I feel like PLA offers enough protection for the cards.
Let me know if you have any suggestions to make this better - thanks!