1 / 5
Halloween Dead Welcomed Living Tolerated — zdjęcie 1
1 / 5

Halloween Dead Welcomed Living Tolerated

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Ocena
0 / 5
Polubienia
11
Pobrania
26
Wydruki
0
Wyświetlenia
64
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Dead welcomed, Living tolerated Halloween Hueforge decoration.

 

Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 179x178.8mm in size


You may print at higher layer heights below the Min Depth of 0.48mm


The Max Depth is 2.7mm and the Actual Depth is 2.6mm

 

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5


This print uses 3 unique filaments

 

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Orange
At layer #22 (1.84mm) swap to White for the rest.

Tagi