Klickfast Belt Dock - 42mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Klickfast Belt Dock by @ItsGhost, altering the size to fit the UK Ambulance Service issue belt.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
The Klickfast Belt Dock by @ItsGhost is an excellent model, but unfortunately the sizes aren't right for the current UK Ambulance Service issue nylon webbing belt. The belt is 40mm deep, so the 38mm variant is slightly too small, and the 50mm variant gives too much movement.
Because the metal clasp at the end of the belt is slightly deeper than the belt, I've had to go with 42mm to allow the end part to pass through. This gives a slight gap, but still snug enough to stop the dock moving around too much.
All the same features are still present.
Check out the original (https://www.printables.com/model/918737-klickfast-belt-dock ) for the other sizes.
- Printed in Prusament Galaxy Black ASA:
- Nozzle: 0.4mm
- Layer height: 0.20mm quality
- Infill: 50%
- Supports: on baseplate only, snug