Spool holder super awesome edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Did we really need another spool holder? probably not but many of the ones I printed fell short so made my own
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
yah yah another spool holder but since I made it of course I think its better than everyone elses.
this spool holder is wide, hefty and solid but still fits mini spools. has good retention and just looks cool.
print 2 of the holder part, 2 rods and 4 spacers. insert spacer into bearing then drop into holder and bolt up one side is cut for the nut and the other a round bolt head. Insert rods where you see fit.
Parts required:
4X 608zz bearings
4X M3x18mm bolts
4X M3 nuts
UPDATE: added some rods for those ppl who like to have the two sides locked together, not required but print and use them if you like. These are sized to work for 1kg and smaller spools, if you want them to go wide enough for larger spools then scale up til it meets your needs. these are small so I printed them at .5 line width 3 wall lines and 25% infill to not be flimsy. print two rods. I have some other ideas so I may continue to add to this so if your interested check back for more updates.
UPDATE2: Added TPU feet, suggest to print these in ninjaflex or something equally soft and grippy. print 4 and apply to bottom corners