Hexagon Slow Feeder for 6" Dia Bowl ver 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feeder stand adjusted for a larger bowl (6.1 inches dia) and extended arms commensurately. See version 2 for less spills
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is version 1. Look for version 2 which adds a trough to direct the falling food into the dish and not onto the floor. :)
The only piece I changed from the original "Hexagon Slow Feeder" was the feeder stand. I increased the depth & width of the floor to accommodate a dish slightly larger than 6" in diameter. I extended the arms commensurately.
I didn't change the distance between the arms or the size for the locks and end cap so the original parts may be used. I uploaded them here to make it easier.
Note that the original STEP files were composed of multiple parts. That remains unchanged in my files which is why two of the parts are SolidWorks assemblies instead of part files.
This was printed with PLA on my Prusa XL using organic supports.
I've attached STL, STEP, and SolidWorks file formats.